PLANET MCU-1400 - Manual (Page 9)

2
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of MCU
• Network cables. Use standard 10/100/1000Base-TX network (UTP) cables with RJ45
connectors.
• TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for
WAN port usage)
Administration Interface
PLANET MCU provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
:
To start MCU web configuration, you must have the web browsers installed on computer for
management
•
Microsoft Internet Explorer 6.0.0 or higher with Java support
Default Eth0 interface IP address of MCU is 172.16.0.1. You may now open your web browser, and
insert 172.16.0.1 in the address bar of your web browser to logon MCU web configuration page.
MCU will prompt for logon username/password, please enter: admin / 123 to continue machine
administration.
Figure 2-1. Input prompt