PLANET MCU-1400 - Manual (Page 8)

8
Item Description
1 Power Jack
Connect the power supply cord shipped with the system. Use of
other power supply cords may cause overloading.
2
PS/2 Keyboard/Mouse
Connector The PS/2 allow user to connect keyboard and mouse for operating
the system.
3 USB Port
The USB port allows users to connect an external USB device to
the unit, such as a USB ThumbDrive© or a USB mouse.
*This advanced feature will available in the future.
4 Serial Port The serial port for sending and receiving signals.
5 VGA Port
A VGA output connector is offered for connecting to a VGA
monitor.
6 LAN Jack (Eth0)
7 LAN Jack (Eth1)
These RJ-45 ports support auto negotiating Fast Ethernet
10/100/1000 Base-TX networks. That allows your system to be
connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a CAT.5 twisted pair Ethernet
cable.
Table 1-2. Rear Panel description of MCU