Silvercrest TWINTALKER 4810 - Manual (Page 72)

72 Twintalker 4810
Twintalker 4810
15 Troubleshooting
16 Technical specifications
No power Clean the battery contacts with a soft cloth.
Replace the batteries.
No transmission Make sure the PTT - button is pressed completely
before you speak.
Monitor the channel activity and switch to another channel
if the current is used.
No reception Check the speaker volume.
Make sure that you are in the reception range of the sender
and change if necessary your location.
Limited Range and noice
during transmission The talking range depends on the terrain.
Steal constructions, concrete buildings or the use in
vehicles have a bad influence on the range.
Try to avoid as many obstacles as possible and
communicate in a clear line of sight.
Change your locations.
Interference The receiver and transmitter are too close. The mimimum
distance between 2 units is 1,5m.
Channels
Sub-code
Frequency
Range
Batteries
Transmission Power
Modulation Type
Channel spacing
Duo Charger adapter 8
CTCSS 38 / DCS 83
446.00625MHz - 446.09375 MHz
Up to 8 Km (Open field)
4 x AAA Alkaline or 4 x AAA NiMH rechargeable
=< 500mW ERP
FM - F3E
12,5 kHz
Input : 230V AC / 50Hz - Output : 9V DC / 200mA
11