Connecting to your wireless network – LOOQS MeeFrame User Manual
Page 7
User Guide MeeFrame
13
Connecting to your wireless network
MeeFrame is a wireless digital photo frame. In order to enjoy all of the
features of MeeFrame, you need to connect MeeFrame to a wireless network
that allows MeeFrame to access the Internet.
Before you connect MeeFrame to the wireless network, determine whether
your network is set up to assign IP addresses automatically by a DHCP server
or to require a manual entry of static network information. If the former, follow
the steps for the DHCP network. Otherwise, follow the steps for the Static
network.
DHCP Network
1.
Tap Setup→Network. (Network Setup screen appears.)
2.
At the
Network Setup screen, tap the Connect button.
3.
Tap
DHCP. (The access point selection screen appears.)
4.
Select the wireless access point of your choice and tap the
Connect
button.
5.
Enter the security key and tap the
Connect button if required by your
wireless access point.
6.
Verify the network information. (Once connected, you will see a
Network Setup screen populated with network information.)
Static Network
1.
Tap Setup→Network. (Network Setup screen appears.)
2.
At the
Network Setup screen, tap the Connect button.
3.
Tap
Static. (The network information screen appears.)
4.
Enter the network information using the onscreen keyboard and tap the
Apply button. (The access point selection screen appears.)
User Guide MeeFrame
14
5.
Select the wireless access point of your choice and tap the Connect
button.
6.
Enter the security key and tap the
Connect button if required by your
wireless access point.
7.
Verify the network information. (Once connected, you will see a
Network Setup screen populated with network information.)
Note: If you wish to disconnect and re-connect to the same or another
network, tap
Setup→Network and then click the Disconnect button at the
Network Setup screen. This allows you to start over with the network setup.
Note: If your wireless network is set up to hide the SSID, tap the Add Network
button at the access point selection screen and enter the information about
your network before proceeding to the next step.
Note: Once the network is set up, MeeFrame will attempt to connect to the
same network the next time it powers up.