Lanner LEC-3110 - Manual (Page 3)

1
Introduction
Chapter 1
Embedded and Industrial Computing
Chapter 1:
Introduction
The LEC-3110 embedded platform was built on the Intel
D525 processor and ICH8M Chipset With the built-in 10
RS232/422/485 serial ports and PCI-104 connector, the
system aims to meet your needs of rich I/O connectivity
and high availability in a industrial-standard housing
(heavy steel) Furthermore, for extra protection for
the system, the LEC-3110 employs ESD (ElectroStatic
Discharge) Protection of 15KV and Surge Digital Isolation
of 2KV on all its external ports (USB, VGA, COM ports) as
well as the DC power socket which is especially designed
to serve as a redundant power supply method
The LEC-3110 system also features a modulized concept
of board design It allows a quick replacement or removal
of the expanded ports
Some characteristics about the connectors are as the
following:
Ethernet - 6 Ethernet controllers •
supporting10/100/1000 connection speed with Intel
82574 L controllers (all with magnetic isolation of
2KV) and LAN1 and LAN2 support WOL/PXE
VGA with Intel Pineview D integrated graphics
•
controller
Support VGA output ( Maximum resolution 1280 x
•
1024)
Storage - One CF socket and 2 SATA ports (ports come with
+5v DC output in the 7th pin, auto-detecting to support
SATA-DOM)
10 COM ports- 2 in the DB9 form factor, the remaining 8 in
a terminal block form factor All serial ports are capable of
handling RS-232/422/485 signals via a DIP-switch setting
Other features include auto-flow control, up to 15KV in
electrostatic discharge protection and 2KV of surge digital
isolation protection
3 USB Ports - 2 on the front panel and one on the board as
an internal USB type A connector (all with ESD Protection
15KV)
Please refer to the chart below for a detailed description
of the system’s specifications
FEATURE DESCRIPTION LEC-3110
Platform
Form Factor 1U Rackmount
Processor
Intel Atom D525
1.8 GHZ
Chipset Intel ICH8M
BIOS AMIBIOS with 8Mbit FWH
Max. FSB 1333 MHz
Memory
Memory IC On Board On Board 1G DDR3
Memory Socket
1 x SODIMM (DDR3 up to 4GB
per slot)
Max Memory 4GB
Storage
Compact Flash 1 x CF Socket Type I/II
SATA 1 x 2.5” SATA HDD/DOM
IDE 1 x 44-pin IDE header
Networking Controller (Interface) Intel 82574L x 6
Video Controller Intel GMA3150
Audio Codec ALC888 HD Codec
I/O
COM Ports
2 x DB9 (ESD protection of
15KV and Surge Digital Isolation
of 2KV)
2 x 10 pin Terminal Block x 2
All ports are isolated and can
use RS-232/422/485 control
signals (ESD protection of 15KV
and Surge Digital Isolation of
2KV)
Corresponding LEDs on front
panel
USB 2.0 3 (2 x External, 1 x Internal)
LAN
6 x RJ45 GbE, LEDs on front
panel
Expansion PCI-104
Hardware
Monitor
Controller Fitek 81865F hardware monitor
Watchdog timer Yes (1~255 level)
OS Supported
Embedded Windows XP/Linux
kernel 2.4.16 or above/Win-
dowsXP 32 bit
System Specification