iSys C to V - Manual (Page 12)

PAGE 12 --- C to V User Guide © iSys-The Imaging Systems Group Inc.
Centronics™ to Versatec™
Interface Converter Box
KEY FEATURES SPECIFICATIONS
INTERFACE CHARACTERISTICS
Input
Centronics compatible 8 bit parallel IEEE 1284
Compatible 1.0 MB/sec maximum input transfer
rate
Output
Versatec Greensheet shortline(TTL) or
Longline(differential) 1.0 MB/sec maximum output
transfer rate
Functionality
Supports both print and lot modes
Variable bytes/scan support
-1 to 65,535 bytes/scan
Full remote function support
-Remote Line Terminate
-Remote Clear
-Remote Reset
-Remote Form Feed
-Remote End of Transmission
Normal or run length compressed data input
POWER REQUIREMENTS
Input Power
5.0V D.C. Regulated
2.0A maximum input current
PHYSICAL CHARACTERISTICS
Dimensions
Length: 4.0 inches
Width: 3.275
inches
Height: 1.125 inches
Weight: 1.5 lbs
ENVIRONMENTAL CHARACTERISITCS
Storage Temp.
-50C to +75C
Storage Humidity 5% to 95% R.H. (no condensation)
Operation Temp. 0C to +50C
Operation
Humidity 5% to 95% R.H. (no condensation)
Vibration 3 axis 1G at 5Hz, 3 G at 10-60Hz, 30 minute
Duration in X, Y, Z axis (Non-operating)
WHAT’S INCLUDED
The iSys Centronics™ to Versatec™ (CtoV) Interface
Converter Box brings new life to any device equipped with
a Versatec™ parallel interface. The CtoV Box allows
connection between any Centronics™ compatible host
port and a Versatec™ interface equipped peripheral. Full
Versatec™ functionality and speed is maintained with the
low cost of the standard Centronics™ parallel host port.
Open up new connectivity options with third party USB to
Centronics™ parallel adapters and network print servers.
You can be sure of rugged construction and unmatched
reliability for trouble free operation.
iSys - The Imaging Systems Group Inc.
911 28
th St. N.E.
Calgary, AB Canada T2A 7X1
Ph: 403-204-5200
Fax: 403-204-1971
Web: www.iSys-group.com
Standard 120V to 240V switching D.C. adapter with screw
locking power connector Mounting Brackets