iSys Iterra Mi875 - Manual (Page 31)

December 2011: Revision 001
31
12. Common Display Panel Procedures
It is important to follow these procedures when performing routine tasks. They will help extend the life
of the consumables and help with print quality.
Printer Shutdown Menu
Releasing the Printhead Latch
1.
2. Turn the printer Offline
3. Select Menu
11. Select Maintenance
12. Select PH Release
13. Press Select again
14. At the flashing arrow, up arrow to Yes
15. Press Save
16. Down arrow to Exit to Offline
17. Press Select
18. Select Offline to turn the printer Online
4. Getting Ready to Move the Printer as outlined above.
5. If removing the ink tanks and printhead, follow the printhead removal procedure
outlined in Releasing the Printhead Latch
6. Remove the ink tanks.
7. From the main menu, select Shutdown.
8. When Shutdown is complete, power down the printer.
This will shut the printer down in an orderly fashion.
Restarting the Printer after a Move
1. Power the printer on.
2. Wait until the printer has performed its own maintenance.
3. Perform a PH Heavy Clean as outlined in Cleaning the Printheads above.
4. Load paper.