Network settings, Network configure – iSys Iterra Mi875 User Manual
Page 26

December 2011: Revision 001
26
Network Settings
Network Settings allow the user to set the values for an IP address, the Subnet Mask and
the Default Gateway.
Please note that the values are not sent to the printer until they are saved using Network
Configure.
Network Configure
Manual/Auto:
allows the printer to be set to DHCP or have a static IP address. The default is
manual, which is a static address.
If changing to DHCP, must be set before Apply
Settings.
Apply Settings:
Updates all the values set in Network Settings and Manual/Auto to the printer.