Applying network settings – iSys Iterra Mi875 User Manual
Page 30
December 2011: Revision 001
30
8.
When the arrow is flashing, use the up and down arrows to adjust the value
9.
When you have set the desired value, press Save
10. Press Select again and change the next value.
11. Continue until the desired IP address is set
12. Down arrow to Exit
13. Follow the procedure for Applying Network Settings
Applying Network Settings
1.
Turn the printer Offline
2.
Select Menu
3.
Select until you reach Page 3
4.
Arrow down to Network Configure
5.
Select Apply Settings
6.
Press Select
7.
When the flashing arrow appears, up arrow to Yes
8.
Press Save
9.
Down arrow to Exit to Offline
10. Press Offline to bring the printer online