iSys iTerra Elite Color LED Printer User Manual

Page 30

PAGE 30 --- Auto Stacker User Guide

Group Inc.

7.4 SET PRINTER TYPE

Step 1:

Unplug power to Auto Stacker.

Step 2:

Press and hold “RESET” button then plug power into the Auto
Stacker. (hold until LED’s flash)

*NOTE:
By repeating steps 1&2 the Printer Type will toggle between PRO
and ELITE.

Step 3:

Unplug power to rear stacker then plug power into the

Auto

Stacker.

Step 4:

On the boot up sequence watch the yellow LED:
If it Flashes 1x = Pro
If it Flashes 2x = Elite (default)

Step 5:

Repeat steps 1-2 if the yellow LED flash does not match your
printer type.