Impinj Revolution Reader System - Manual

IMPINJ SOLUTIONS
Software
Reader Antennas
Tag Chips
Reader Chips
This guide provides simple steps to quickly start using your new
Speedway
® Revolution reader. For a full description of connection
methods, reader configuration and system setup options, please
consult the latest Speedway Installation and Operations Manual.
Box Contents
• 1 Speedway Revolution reader
• 1 Quick Start Guide
• May include tag samples from Impinj
inlay partners* featuring Monza ® chips
Available separately:
• Power supply **
• Power cord
• Console cable
• Antenna
Before getting started, download and install the following on your PC:
http://support.impinj.com/downloads
• Impinj Multireader Software Utility
• Speedway Revolution Installation and Operations Manual
http://support.apple.com/kb/dl999
• Bonjour Print Services
SPEEDWAY REVOLUTION READER CONNECTORS
1 +24 VDC locking power
supply connector
2 10/100Base-T Ethernet
port (RJ45)
3 USB Device and Host ports
1 2 3 4 5
6 7
4 Management console port
(RJ45)
5 GPIO (DB-15)
6 Antenna ports (RP TNC)
7 LED indicators
Quick Start Guide
SPEEDWAY ® REVOLUTION READER
Notices: Copyright © 2011-2012, Impinj, Inc. All rights reserved.
Impinj gives no representation or warranty, express or implied, for accuracy or reliability of information in this document. Impinj reserves the
right to change its products and services and this information at any time without notice.
EXCEPT AS PROVIDED IN IMPINJ’S TERMS AND CONDITIONS OF SALE (OR AS OTHERWISE AGREED IN A VALID WRITTEN INDIVIDUAL
AGREEMENT WITH IMPINJ), IMPINJ ASSUMES NO LIABILITY WHATSOEVER AND IMPINJ DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY,
RELATED TO SALE AND/OR USE OF IMPINJ PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY PATENT, COPYRIGHT, MASK WORK RIGHT, OR OTHER
INTELLECTUAL PROPERTY RIGHT IS GRANTED BY THIS DOCUMENT.
Impinj assumes no liability for applications assistance or customer product design. Customers should provide adequate design and operating
safeguards to minimize risks.
Impinj products are not designed, warranted or authorized for use in any product or application where a malfunction may reasonably be
expected to cause personal injury or death or property or environmental damage (“hazardous uses”) or for use in automotive environments.
Customers must indemnify Impinj against any damages arising out of the use of Impinj products in any hazardous or automotive uses.
Impinj, Indy, Monza, Speedway, and STP are trademarks or registered trademarks of Impinj, Inc. All other product or service names are
trademarks of their respective companies.
Impinj’s application software, including Speedway Connect,
Octane SDK, and the STP™ source tagging platform, helps
you quickly integrate RFID into existing systems and provide
flexibility for additional functionality in your solution.
The Impinj family of reader antennas controls read zones
from point of sale to packaging lines.
Monza ® tag chips set the standard in RFID performance
and features, providing the industry’s best sensitivity,
omni-directional antenna support, and innovative
privacy features.
Indy ® reader chips provide integration and supporting
software to power a full range of RFID readers and
embedded applications.
Insist on RFID Solutions Powered by Impinj
The choice of components that make up an RFID system determines the quality,
reliability and performance of an RFID implementation. Impinj customers realize
increased system data reliability, greater insight into the supply chain, safer
products,improved customer experience, and more.
Impinj, Inc. 701 N. 34th Street, Suite 300 Seattle, WA 98103 www.impinj.com
[email protected] Tel: 206.517.5300 Fax: 206.517.5262
4 Document Version 2.3 Part Number: 50484.040-407 Document Version 2.3 Part Number: 50484.040-407 © 2011-2013, Impinj, Inc. © 2011-2013, Impinj, Inc.
*Samples are provided courtesy of our inlay partner(s), and may not be available with every reader. Samples are provided for use in reader
setup and to experience unique Monza features, and are not intended to represent all the Monza-based inlay varieties available from Impinj
inlay partners. We encourage you to ask your provider about RFID labels or inlays featuring Monza tags.
**This product is intended to be supplied with a Listed/Certified power supply, marked LPS or Class 2, with 24Vdc output, rated minimum 2.5A.
(Ce produit est conçu pour être alimenté avec une alimentation Mis / certifiés, marqué LPS ou de classe 2, avec sortie 24V, 2,5 A nominal minimum)