H3C Technologies H3C MSR 800 - Manual (Page 40)

33
LED Location Status Description
Flashing green
(8 Hz) The system software image is being copied and
decompressed.
Flashing green
(1 Hz) Comware has started with the configuration file and
the router has booted up.
Flashing yellow
(1 Hz)
The SDRAM has failed the self-test.
Flashing yellow
(8 Hz)
The extended segment does not exist.
Steady yellow The system software image does not exist.
VPN LED Front panel
Off No IPSec VPN tunnel is present.
Steady on A minimum of one IPSec VPN tunnel is present..
WLAN status
LED
Front panel
Off No link is present.
Steady green The radio interface is connected.
Flashing green Data is being received or transmitted.
GE/combo
port status LED Front panel
Off No link is present.
Steady green A 1000-Mbps link is present.
Flashing green
Data is being received or transmitted at 1000
Mbps.
Steady yellow A 10/100-Mbps link is present.
Flashing yellow
Data is being received or transmitted at 10/100
Mbps.