ARM Electronics C9TMX - Manual (Page 25)

25
9. Remote Setup
REMOTE BAUD RATE: 2400 / 4800 / 9600 / 19200
MACHINE ADDRESS ID: Use the UP/DOWN/ENTER keys to set the
Address ID of this machine. In the whole system architecture, the value is
range from 01 to 16.
MACHINE NAME: There are 5 character spaces to hold the name.
PORT 1 DEVICE TYPE: This switch define which device the port 1 (RS485)
is connecting. The default is KEYB (REMOTE KEYBOARD)
PORT 2 DEVICE TYPE: This switch define which device the port 2 (RS485)
is connecting. The default is LILIN (LILIN’S FAST DOME)
PORT CROSS LINK: This switch is setting whether both the PORT 1 & PORT
2 are cross connected?
“ON”: Both PORT 1 & PORT 2 are connected. The Multiplex can use
PORT 1 to connect one Remote Keyboard and one kind of Fast Dome via
PORT 2 bus, and it can be controlled by this Remote Keyboard, but it
cannot connect any Fast Dome in the PORT 1 bus. In this architecture
you can install multiple keyboard via PORT 1 bus.
“OFF”: Both PORT 1 & PORT 2 are not cross connected.
The multiplex can use PORT 1 to connect one Remote Keyboard and one
kind of fast Dome via PORT 1 bus, and both the mux and fast Dome can be
controlled by the Remote keyboard, on the same bus, but not the fast Dome
at the other side.
In This architecture, the multiplex can also install another keyboard and
another kind of fast Dome via PORT 2 bus, and it can be controlled by this
Keyboard on the same bus.
REMOTE SETUP
REMOTE BAUD RATE 9600
MACHINE ADDRESS ID 01
MACHINE NAME MUX_ _
PORT 1 DEVICE TYPE KEYB
PORT 2 DEVICE TYPE LILIN
PORT CROSS LINK ON
PORT CROSS LINK ON