ARM Electronics C9TMX - Manual (Page 20)

20
NORMAL RECORD: Enable/disable the recording function for each channel.
“NO”: This channel will be recorded out to the VCR OUT port.
“OFF”: This channel will not be recorded out to the VCR OUT Port.
ALARM WEIGHTED: Enable/disable the alarm-weighted function for each
channel.
“NO”: This channel will be weighted recorded out to the VCR OUT port.
“OFF”: This channel will not be weighted recorded out to the VCR OUT
port.
MOTION WEIGHTED: Enable/disable the motion weighted function for each
channel.
“NO”: This channel will be weighted recorded out to the VCR OUT port.
“OFF”: This channel will not be weighted recorded out to the VCR OUT
port.
Note: The method of the channel weighted record is descript as following:
Example: There are channel 1,2,3,4,7 and 9 in the normal record output path.
The sequence of record output video flow is as below.
1? 2? 3? 4? 7? 9? 1? 2? 3? 4? 7… … … … …
In this condition, the alarm events are happened in the channel 3 and 7.
And then the sequence of record out put video flow is channel as below:
1? 3? 7? 2? 3? 7? 4? 3? 7? 9? 3? 7? 1?
3? 7? 2? 3? 7? 4? 3? 7? 9? 3? 7… … .