ARM Electronics C4TMX - Manual (Page 18)

6. System Setup
BAUD RATE SETTING
Use the UP/ DOWN keys to select RS232 BAUD RATE and LEFT/ RIGHT keys to
change the baud rate from 1200 ~9600.
SEQUENCE DWELL TIME SETTING
Use the UP/ DOWN keys to select SEQUENCE DWELL TIME and LEFT/ RIGHT
keys to change the dwell time from 000 ~ 999 SEC for the auto sequence function .
VIDEO TYPE SETTING
Use the UP/ DOWN keys to select VIDEO TYPE and LEFT/ RIGHT keys to switch
the video signal format between NTSC and PAL .
SYSTEM DEFAULT SETTING
Use the UP/ DOWN keys to select SYSTEM DEFAULT and ENTER key to
make the system to be restored the default parameters before shipped .
SYSTEM SETUP
RS232 BAUD RATE 9600
SEQUENCE DWELL TIME 003 SEC
VIDEO TYPE NTSC PAL
SYSTEM DEFAULT
ENTER
BACK TO MENU ENTER
16