Alinco DR-SR8 - Manual (Page 21)

19
Chapter 1 Getting Started
No. Key Principal Function
(18) PHONE jack [PHONE] For connecting external headphones. Takes 8 to 32 ohm impedance
headphones.
(19) SPEAKER jack [SP] For connecting an external speaker. Takes 8 to 16 ohm impedance
speakers.
Connect optional ERW-4C or ERW-7 cable for PC-interface.
(20) Microphone connector
[MIC]
For connecting a microphone.
(21) Internal Speaker Received signals are heard from here.
(22) TX/RX LED Lights red when transmitting the signal.
Lights green when signals are received or squelch is open
(unmuted).
(23) LCD Display Shows operating and setting information.
Front Panel (keypad)
(24)
(27)
(30)
(33)
(25)
(28)
(31)
(34)
(26)
(29)
(32)
(35)
No. Key Function
(24) 1 To recall 1.8 MHz Band (Freq. direct input 1)
(25) 2 To recall 3.5 MHz Band (Freq. direct input 2)
(26) 3 To recall 5.3 MHz Band* (Freq. direct input 3)
(27) 4 To recall 7 MHz Band (Freq. direct input 4)
(28) 5 To recall 10 MHz Band (Freq. direct input 5)
(29) 6 To recall 14 MHz Band (Freq. direct input 6)
(30) 7 To recall 18 MHz Band (Freq. direct input 7)
(31) 8 To recall 21 MHz Band (Freq. direct input 8)
(32) 9 To recall 24 MHz Band (Freq. direct input 9)
(33) . Enters a frequency direct input 100 kHz (Freq. direct input decimal)
(34) 0 To recall 28 MHz Band (Freq. direct input 0)
(35) ENT Enters a frequency direct input
* 5 channels allocated to the amateur-radio services can be transmitted on T version.
Please refer Page 94 for details.