Sundance SMT8090-374 - Manual (Page 8)

Version 0.9 Page 8 of 12 SMT8090 User Manual
Hardware installation.
Here are the steps to follow to install the SMT8090_374 system.
1 – Place the SMT374 on TIM site 1 of the carrier board (SMT310Q).
2 – The following are then required to mount SMT338-VP+390 on the SMT310Q:
Top Primary TIM Connector
Bottom Primary TIM Connector
SHB
B
SHB
A
RSL
B
RSL
A
Po
w
e
r
SMT390
TIM 3.3V
TIM 3.3V
Holes mounted with
Nylon screw (M2x10) and
4 Nylon nuts (M2)
SMT338-VP
Holes mounted with
Nylon screw (M2x10) and
4 Nylon nuts (M2)
a – First, fit two Nylon screws (M2x10), pointing out (the head of the screws on
bottom side).