Sundance SMT8090-374 - Manual (Page 5)

Version 0.9 Page 5 of 12 SMT8090 User Manual
Outline description.
The SMT8090_374 is a dual-C6713 based module (SMT374) combined with a dual
high-speed ADC module (SMT390-VP composed of SMT338-VP and SMT390).
SMT374 characteristics:
⇒ Dual TMS320C6713 processor running at 225MHz
⇒ Six 20MB/s communication ports (comm.-ports)
⇒ 128MBytes of SDRAM (100MHz)
⇒ 8MByte Flash ROM for boot code and FPGA programming
⇒ Global expansion connector
⇒ General purpose I/O connector
⇒ High bandwidth data I/O via 2 Sundance High-speed Buses (SHB).
SMT390-VP characteristics:
⇒ Two 12-bit ADCs ( AD9430-210 ) sampling at up to 210MHz via LVDS bus
( SLB ),
⇒ Two Sundance High-speed Bus (SHB) connectors,
⇒ Two 4-channel Rocket Serial Link ( RSL ) connector – 2.5Gbits/second each,
⇒ Two 20 MegaByte/s communication ports,
⇒ Low-jitter on-board system clock,
⇒ Xilinx Virtex-II Pro FPGA (VP30-6),
⇒ 50-Ohm terminated analogue inputs and outputs, external triggers and
clocks via MMCX or MMBX(Huber and Suhner) connectors,
⇒ User defined pins for external connections,
⇒ Compatible with a wide range of Sundance SHB modules,
⇒ TIM standard compatible.
The SMT8090_374 is a demonstration software for the evaluation of the SMT374
and SMT390-VP modules. It can be used for prototyping 3G (3
rd generation) systems
and high-speed data acquisition system with or without digital processor. This
document is an installation guide for the SMT8090_374 demonstration system.
The SMT8090_374 application gets the DSP on the SMT374 to configure the
SMT390_VP FPGA and control clock frequencies, clock routings, data format and
data capture. The DSP grabs data from both channels and stores them into a file for
further processing, like display and FFT.