MovinCool Climate Pro 18 - Manual (Page 20)

20
FEATURES
1. Digital electronic control panel, which allows the user to easily control the
unit’s operation.
2. Three fan speeds (HI, MID, LO) in all modes (COOL, HEAT, FAN ONLY).
3. Large digital LCD display with two backlight colors and multiple lines of
displayed characters that indicate:
• Clock with day and time
• Room temperature and set point temperature (°F or °C)
• Cool, Heat, and Fan Only mode status
• Fan speed and fan mode status
• Confirmation screen to confirm selection status
• Notification screen when an external thermostat is connected
• Program set up and schedule to run and stop
• Self-diagnostic codes with explanation
4. The set point temperature can be adjusted to maximum or minimum value
depending on selected COOL or HEAT mode.
5. Automatic restart feature when the power is lost and regained. The unit returns
to the same operation mode as it was prior to the loss of power. Any preset
program is retained in the memory in the event power loss occurs.
6. Up to ten program slots are available to the user to program a specific time
and day at which the unit automatically begins to operate and turn off.
7. Drain tank and optional condensate pump warning display with instruction.
8. Automatic shut off, warning signal output and alarm for temperature sensor
failure, loss of cooling, and conditions of self-diagnostic codes.
9. External millivolt or 24VAC thermostat connection.
10. External alarm and warning device connection with automatic shut off.