MK Products Prince SG - Manual (Page 14)

Prince ® SG Spool Gun Owner's Manual - Page 6
MK200 Contactor Box
P/N 001-3066
PA-L1 Spool Gun Control - Lincoln
P/N 005-0676
Connects directly to Lincoln Electric power supplies
(42V system) with 14-Pin (X-clocked) amphenol
connectors, such as:
CV 250 CV 300 CV 400
CV 655 DC 400 DC 600
DC 655 V350-Pro (factory model) Ranger 250
Range 275 Ranger 305G
PA-M1 Spool Gun Control - Miller
P/N 005-0261
Connects directly to Miller power supplies (24V
system) that are classified with 14-Pin amphenols
as type 6 or 9 and to Thermal Arc units, such as:
MILLeR SUPPLIeS theRMAL ARc
Millermatic 200 Deltaweld's Thermal Arc 300GMS CC/CV
Shopmaster CP Series Fabricator 210, 250, 300 LF
XMT's & Maxtron Trailblazer 250, 251
Regency's
Any Gas-drive that has a CV tap and contactor installed with a 14 pin amphenol.
PA-G1 Spool Gun Control - Generic
P/N 005-0264
This Generic Torpedo is designed to hook-up to CV
power supplies that supply an auxiliary 26 VAC @
1.7 amps and uses a closing contact signal. The
unit is supplied with bare wires that must be con-
nected to the power supply. Some examples of power supplies that can be
hooked-up are:
Lincoln SP-250, 255 & Wirematic 250 & 255
Beta-Mig 200 & Beta-Mig LF
Airco Dip-Pak 200, 225 & 250
ESAB (L-TEC) / MigMaster 250
P/N 005-0206
An amphenol adaptor cable and gas/power lug
are all that is needed to connect to the Migmaster.
Adaptor kit includes everything needed.
MillerMatic 250 & Vintage / Hobarts BetaMig
2510
P/N 005-0205
This easy to install, plug in module fits the Millermatic
250, Miller Vintage machine, or Hobart Betamig 2510.
It and a Prince ® Spool Gun are all that is needed to get
your customer up and running.
Panasonic Gunslinger 260
P/N 005-0617
Easy to install adapter cable using Gunslinger speed
control.
Spool Gun Control - Miller
Spool Gun Control - Generic
ESAB (L-Tec-Linde) MigMaster 250
Panasonic Gunslinger 260
MK200 Contactor Box
Spool Gun Control - Lincoln
MillerMatic 250, Vintage and BetaMig 2510