MK Products Prince SG - Manual (Page 13)

Prince ® SG Spool Gun Owner's Manual - Page 5
Insulated Groove Drive Roll Kit ......................................................... 005-0642
For .040" (1.0mm)dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ......................................................... 005-0718
For 3/64" (1.2mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Prince
® SG Handle Kit........................................................................ 005-0730
Includes left and right handle with door, trigger and pin,and all
handle screws.
Heavy Duty Spool Gun Brake Spring for Hardwires .......................... 005-0682
Optional Accessories
25' 7 Pin Amphenol Extension Cable ................................................. 005-0660
Used to extend the spool gun. Two cables may be joined together for 50'
extension. Power & gas cables not included.
Snake Skin Velcro ® Cover (Optional)
Leather Snake Skin protective covers are optional for the Prince ® SG. The
Velcro ® closure makes it easy to replace in the field.
23' cover fits 25' lead ..............931-0122
48’ cover fits 50’ lead ..............931-0123
Gas Valve Removal Tool
Gas valve removal is performed by using P/N 931-0105 Gas Valve Removal
Tool. This multifunctional tool has been slotted on one side to encompass
and conform to the gas valve stem and seat into the slotted gas valve body
as seen in Figures 1 and 2. Removal of the gas valve can be accomplished
by turning the gas valve tool counter clockwise. Reinstall by turning clock-
wise. The tool doubles as a bottle opener.
Prince ® SG Spool Gun Controls
WC-1
P/N 001-3062
The WC-1 is desinged to hookup to any CV
or CC power supply having its own contactor.
CC Posa Start “run-in speed” is included as
a standard feature. The control operates on
115VAC, 50-60hz power. For machines such
as gas drives that do not have contactors, the
MK200 Contactor Box (P/N 001-3066) must be used.
WC-1
Gas Valve Removal Tool
Figure 1
Figure 2