2 cannot playback cds, 2 ipod cannot be played back – Marantz SA8005 User Manual
Page 63
63
2 Cannot playback CDs
Symptom
Cause / Solution
Page
Cannot playback when the 1 button
is pressed, or cannot correctly play
back a specific part of the disc.
• The CD is dirty or scratched. Either clean the CD, or insert a different CD.
Cannot playback CD-R/CD-RW.
• CDs cannot be played back unless they have been finalized. Use a finalized disc.
• This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use
a correctly recorded disc.
• The DATA CD playback function of this unit only supports playback of MP3 and WMA files.
–
“0 0:00” is displayed.
• “0 0:00” is displayed if a disc that cannot be played is loaded.
“No Disc” is displayed.
• “No Disc” is displayed if the disc is loaded upside-down or if no disc is loaded.
2 iPod cannot be played back
Symptom
Cause/Solution
Page
iPod cannot be connected or “Check
iPod” is displayed.
• When using iPod by connecting it to the USB port, some iPod variations are not supported.
• When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
recognized. Use a genuine USB cable.
–