IPUX ICS2300 Advanced Installation Guide - Manual (Page 43)

- 42 -
The higher setting (VGA) obtains better video quality while
it uses more resource within your network.
- Video Quality: Select the desired image quality from five
levels: Lowest, Low, Medium, High, and Highest.
- Frame Rate: Select a proper setting depending on your
network status.
NOTE The camera supports H.264, MPEG4 and MJPEG compression.
Please note that that MJPEG mode captures the images in
JPEG format, which requires higher bandwidth to view smooth
video. You can control the bandwidth of each connection well
through the setting options above. For the bandwidth
information, refer to the Appendix, Bandwidth Reference Guide.
 3GPP: The camera supports 3GPP specification. Select the
Disable option to disable this feature. Otherwise, select
3GPP Without Audio or 3GPP With Audio to transfer the
video clips without or with audio.
If you use a mobile phone that supports 3GPP, you can also
view the real-time streaming image captured by the camera
on your phone (with the default player on the phone) by
entering the RTSP link:
rtsp://(IP address of the camera)/3gp .
NOTE Your mobile phone and the service provider must support 3GPP
function. Please contact your service provider when you are
failed to use this service.
4.6.3 Video & Audio >> Audio
 Camera Microphone In: Select the Enable option to enable
the camera’s audio function, so that you can receive the on-
site sound and voice from the camera.
 Camera Speaker Out: Select the Enable option to enable
the camera’s external speaker function, so that the
connected speaker can play the sound and voice through the
camera.
- Volume: Set the speaker’s volume.