IPUX ICS2300 Advanced Installation Guide - Manual (Page 36)

- 35 -
4.4.4 Network >> Wireless Setting (for wireless
model)
The camera supports WLAN while you use the wireless network.
Select the Enable option to enable this feature.

Wireless
- Network ID (SSID): Keep the default setting of this option
to connect the camera to any access point under the
infrastructure network mode. To connect the camera to a
specified access point, set a SSID for the camera to
correspond with the access point’s ESS-ID. To connect the
camera to an Ad-Hoc wireless workgroup, set the same
wireless channel and SSID to match with the computer’s
configuration.
Click Site Survey to display the available wireless
networks, so that you can easily connect to one of the
listed wireless networks.