Insinger Commander 18-6VG - Manual (Page 8)

TROUBLESHOOTING
Faults where it is not necessary to call Insinger. You
can rectify minor faults yourself following the steps
described in the table below.
If you are unable to rectify the fault, contact Insinger
service (1-800-344-4802.)
Do not open any panels or expose any parts of the
machine if tools are necessary to do so.
Risk of electric shock.
Work on the electrical equipment should only be
performed by service personnel.
First disconnect the washer from the main power.
Do not switch the washer on again until the cause of
the fault has been identified.
PART 4 MAINTENANCE AND REPAIR
®
Commander18_6VGAddendumTM09 www.insingermachine.com 800-344-4802
6
TROUBLESHOOTING
Problem Cause Remedy
Blower not running No power
Motor failed
Check power source
Replace motor and blower assy
Intake damper not opening No power
Check damper linkage
Check for binding
Solenoid not function
Check power source
Replace or adjust linkage if bent
Lightly lubricate binding point
Replace solenoid
Bypass damper not opening No power
Check damper linkage
Check for binding
Solenoid not function
Check power source
Replace or adjust linkage if bent
Lightly lubricate binding point
Replace solenoid
Water coming out of box corners Drain line clogged Unclog drain