DirecTV HD DVR - Manual (Page 83)

72
Making the Basic Connections
1) Connect the DIRECTV Plus HD DVR to the Satellite Dish via SWM (Single Wire Multiswitch).
Depending on the type of network connection you are using, you may have to connect the RG-6
RF coaxial cable from your SWM to the jack labeled SATELLITE IN on the back of the DI-
RECTV Plus HD DVR. Some systems may instead make this connection to a cable entry point in
your house. Your DIRECTV installer will make the appropriate connection.
2) Connect the DIRECTV Plus HD DVR to land-based telephone line. Plug one end of the telephone
cord into a phone jack on your wall (or into a phone splitter that is plugged into a phone jack) and
the other end into the PHONE JACK on the back of the DIRECTV Plus HD DVR.
3) Plug all power cords into electrical sockets.
You’re almost
done!
HR21 Book.indb 72 HR21 Book.indb 72 7/31/07 2:36:29 PM 7/31/07 2:36:29 PM