Avionics Innovations AI-CD II P/N: 14001-20 Operation Manual - Manual (Page 6)

Avionics Innovations
AICD II Operation Manual
6
MANUAL TUNING
(1) Press the (MODE) button until a radio frequency appears in the
display.
(2) Press the (BAND) button repeatedly until the desired radio band is
displayed. Each press changes the band:
F1 / F2 / AM
(3) Press the (TUNE) button to illuminate the DX and SEEK indicators
in the display. With the DX (Distance) mode activated, both strong
and weak stations will be tuned in the Auto-Seek operation. Press
again to return to the local mode. The DX indicator will turn off and
the SEEK indicator will remain illuminated. Now, only strong
stations will be tuned.
(4) Press the (DOWN or UP) button to automatically seek a station
downward or upward respectively. The unit will stop at the next
station it finds. Press the same button again to seek next station
Down or Up.
MANUAL STORING OF STATION PRESETS
(1) Select the radio band and tune in a desired radio station you wish to
store in the preset memory.
(2) Press and hold any one of the preset buttons (1 through 6) for at 2
seconds until the station frequency on the display blinks.
(3) Press the preset button into which you wish to store the station while
the frequency display is blinking (within 5 seconds). The display
stops blinking once the station has been memorized. The display
shows the band preset Number.
(4) Repeat the procedure to store up to 5 other stations onto the same
band. To use this procedure for other bands, simply select the band
desired and repeat the procedure.