Avionics Innovations AI-CD II P/N: 14001-20 Operation Manual - Manual (Page 4)

Avionics Innovations
AICD II Operation Manual
4
TURNING POWER ON AND OFF
(1) Press the (POWER) button to turn on the unit.
NOTE: The unit can be turned on by pressing any other button except
the eject and (TITLE) button.
The volume level gradually increases to the previous level you were
listening to before the unit was turned off. Press the (POWER) button
again to turn off the unit.
ADJUSTING VOLUME/BASS/TREBLE/BALANCE
(1) Press the (Audio Control) knob repeatedly to choose the desired
mode.
Each press changes the modes as follows:
VOL / BAS / TRE / FAD / BAL
Note: If the (Audio Control) knob is not rotated within 5 seconds
after selecting the BASS, TREBLE, BALANCE, or FADER mode,
the unit automatically returns to the VOLUME mode.
(2) Rotate the (Audio Control) knob until the desired sound is obtained in
each mode.
Note: The settings of the Bass and Treble will be individually
memorized for each Mode (FM/AM and CD) until the setting is
changed. Depending on the connected devices some functions and
display indications do not work.
AUDIO MUTE FUNCTION
Activating this function will instantly lower the volume level by 20 dB.
(1) Press the (MUTE) button to activate the MUTE mode. The audio
level will decrease by about 20 dB. Pressing the (MUTE) button
again will bring the audio back to its previous level.