Avionics Innovations AI-CD II P/N: 14001-20 Operation Manual User Manual
Page 14
Avionics Innovations
AICD II Operation Manual
14
TITLING DISCS
(1) Press the (TITLE) button to display the disc title.
(2) Press and hold the (TITLE) button for a least 3 seconds. The first
digit will blink.
(3) Rotate the (Audio Control) knob to select the desired
letter/numeral/symbol available for naming. (“A” for example).
(4) Press the (Audio Control) button to store the first character. The first
character will stop blinking and the display will automatically
advance to the next character. When that character begins to blink,
you may choose the next letter or symbol of your title.
(5) Repeat the steps 3 and 4 above to complete the titling. Pressing the
(Audio Control) knob after entering the eighth character,
automatically stores the title into memory.
When entering a title of less than 8 characters (for example, 3
character title): After entering 3 characters to complete your title, the
4
th
character space will be blinking. Go to step 6 to complete the title.
(6) Press and hold the (TITLE) button for at least 3 seconds to record the
title.
Notes: The memory capacity for the disc titles is 18. If you try to
store beyond the limit, the display will show “FULL DATA.” At this
point, no more titles can be stored. When you want to erase a title,
enter the “T “ symbol into all spaces. The CD Shuttle title length or
memory capacity varies depending upon the model being used. The
CD titles stored in memory will be erased if the cable to the CD
Shuttle (if installed) is disconnected.