Introduction, Kit features – Zilog ZUSBOPTS User Manual
Page 8
UM026203-0115
Introduction
MultiMotor Series Development Kit
User Manual
1
Introduction
Zilog’s MultiMotor Series Development Kit (ZMULTIMC100ZCOG) aids in the develop-
ment of motor control applications using an assortment of Zilog MCUs aimed at the motor
control environment. It provides an application-specific platform for creating a design
using a Zilog motor control MCU. This development platform features a 3-phase MultiM-
otor Series Development Board connected to a Zilog MCU Module, which is available
separately.
A 24 V DC/3200 RPM 3-phase motor is included with the Kit. Several motor types are
supported, including BLDC, PMSM, and ACIM. Control algorithms including sensored,
sensorless, trapezoidal, sinusoidal, and FOC/vector are also supported in this MultiMotor
Series.
This version of the MultiMotor Series Development Kit does not include a MultiMotor Series
MCU Module, which must be purchased separately to use this kit. Each of Zilog’s MultiMotor
Series MCU modules features a different Zilog MCU capable of motor control and contains a
debug connector to connect the board to a host development PC via an opto-isolated USB Smart-
Cable.
Kit Features
The key features of the MultiMotor Series Development Kit include:
•
3-phase MultiMotor Series Development Board capable of driving multiple motor
types
•
Multiple MCU modules using different Zilog microcontrollers designed specifically
for motor control (must be ordered separately)
•
3-phase, 24 V DC, 30 W, 3200 RPM motor with Internal Hall Sensors capable of run-
ning in Sensored or Sensorless modes
•
UART-to-USB adapter with opto-isolator
•
Universal 24 V AC/DC power supply
•
USB SmartCable with opto-isolator (must be ordered separately)
For MultiMotor Series Development Kit installation and setup instructions, refer to the
document is avail-
able free for download from
Note: