WaveWare API-64 Alarm Monitoring - Manual (Page 13)

6. Momentarily power down the API-64RM and then power it back up.
7. Press the key within 5 seconds of powering the unit back up.
8. "Dial no:" should appear on the screen of the computer that you are using. Enter the paging terminal
telephone number that you obtained from the paging supplier or system manager keys.
Remember to include the area code if required. Include any other digits, or pauses required in the dial string
to obtain an outside line if required. Press
9. " Password:" will appear. If the paging company or system uses a password, enter the number that was
supplied to you. If the paging company or system does not use passwords (most do not) leave this field
blank and press the key. Type to exit the programming. Connect the API-64RM to
the API-64 using the cable supplied as shown in the connection diagram on page 3-2.
***********For API-64RM leave all other fields blank in the programming menu***************
WARNING: CONNECTING A TELEPHONE LINE TO THE PROGRAMMING/RS232 PORT ON THE
API-64RM WILL CAUSE DAMAGE TO THE UNIT. REFER TO THE CONNECTION DIAGRAM ON
PAGE 3-2 OF THIS MANUAL.