Toyotomi FB-38N(FS) User Manual
Page 5
5
SECTION B:
SPECIFICATIONS
SPECIFICATIONS
Model:
FB-38N(FS) / FB-52N(FS)
Type:
- Combustion Type
Pressure Vapor
- Exhaust system
Forced Exhaust type
- Purpose
Floor Heating
Ignition:
High Voltage Discharge Spark
Fuel:
Kerosene
(Paraffin)
Fuel Consumption:
4.2 L/h / 5.85 L/h
Efficiency:
87.0%
Heating Output:
128,300 BTU/h / 179,000 BTU/h
(37.6 kW) / (52.4 kW)
Capacity of Heat Exchanger:
19.5 lit. / 25 lit.
Max. Pressure:
100 kPa
Thermal Conduction area of
0.9 m
2
/ 1.0 m
2
Heat Exchanger:
Dimensions (W x D x H):
320 x 570 x 816 mm / 320 x 570 x 983 mm
Weight:
35 kg / 37 kg
Electrical Rating:
AC230 V, 50 Hz
Ignition: 106 W / 138 W
Burning: 86 W / 129 W
Operating Ambient Temperature:
-20°C ~ 40°C
Humidity:
90 % (At the condition without dew condensation)
Exhaust Air Temperature:
less than 260°C
Diameter of Required Exhaust Pipe:
φ
106 mm
Sound Pressure Level:
48 dB (A) / 5 dB (A)
Nozzle
- Quantity of Vapor:
1.10 GPH / 1.35 GPH
- Spraying Pattern:
Danfoss KH
- Spraying Angle:
60°
Electric Current Fuse:
250V AC, 5A
CE Marking
- Low Voltage Directive:
2006/95/EC
- EMC Directive:
2004/108/EC
Safety Device:
Ignition Safety Device, Over-heat Protector,
Power Failure Recovery System, Fuel Strainer,
Heat Exchanger Bi-metal Switch, Tip-over Switch
Thermal
Fuse
Accessories:
Exhaust Pipe Top (1), Rubber Fuel Pipe (1),
Hose band (2), Remote control (1), Remote
Controller Cord (3m), Adhesive Tape (2),
Wooden Screw (2), Screw (2)