Denso CU-7011 - Manual (Page 7)

v
• Avoid dropping the battery cartridge or letting it undergo any shock or
impact.
Doing so could cause the batteries to break, generate heat, rupture or
burn.
• Only use the dedicated charger (CU-7011,
CU-7001, C-700 or C-750) for charging the
battery cartridge.
Using a different type of charger could
cause battery-rupture or leakage of battery
fluid and result in a fire, bodily injury, or se-
rious damage to property.
• Never charge the battery cartridge where any inflammable gases may
be emitted; doing so could cause fire.
Handling the CU
• If smoke, abnormal odors or noises come from the CU, immediately un-
plug the AC adapter from the wall socket and contact your nearest
dealer.
Failure to do so could cause fire or electrical shock.
• If foreign material or water gets into the CU, immediately unplug the AC
adapter from the wall socket and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• If you drop the CU so as to damage its housing, immediately unplug the
AC adapter from the wall socket and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• Never use the CU for charging anything other than the specified battery
cartridges.
Doing so could cause heat, battery-rupture, or fire.
• Never bring any metals into contact with the output terminals.
Doing so could produce a large current through the CU, resulting in heat
or fire, as well as damage to the CU.
• Use the dedicated AC adapter only. Failure to do so could result in fire.
• Never use the CU on the line voltage other than the specified level. Do-
ing so could cause the CU to break or burn.
• If the power cord of the AC adapter is damaged (e.g., exposed or broken
lead wires), stop using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
WARNING
Undedicated
Charge only
with the
dedicated
device.