Brennenstuhl COB LED Light SL CN 150 IP65 with tripod 5m H07RN-F 3G1,0 50W 3500lm Energy efficiency class A - Manual (Page 6)

6
D
Operating Instructions Chip LED Light with Tripod
MOuNTINg THE LED LIgHT ON THE TrIpOD
Loosen screw (C). Unfold the feet of the tripod. Re-tighten screw (C).
Attach the LED light to the tripod with mounting screw (A), using the centre hole of the mounting
bracket.
To adjust the height of the tripod, loosen screw (B). Expand the tripod to the desired height and
re-tighten screw (B).
MaINTENaNCE aND CLEaNINg
All maintenance work must be carried out by a qualified electrician.
PLEASE NOTE: The LED light does not contain parts that need servicing. The LED light source
cannot be replaced. If necessary, replace the entire light.
Do not use solvents, corrosive cleaners or the like. Use a dry or slightly moist cloth for cleaning
ONLY.
B screw
C screw
a mounting screw
0.80 –1.62 m
BA_Chip_LED_Leuchte_Stativ_Aenderung_3_1409.indd 6 08.09.14 17:13