Brennenstuhl COB LED Light SL CN 150 IP65 with tripod 5m H07RN-F 3G1,0 50W 3500lm Energy efficiency class A - Manual (Page 5)

5
D
Operating Instructions
Chip LED Light with Tripod
Please note: Please read these instructions carefully prior to mounting the light and store them in
a safe location afterwards!
SpECIfICaTIONS
Model:
SL CN 150 IP65, SL CN 150 IP65 GB
Protection class: I
Type of protection: IP65
Nominal voltage: 220 – 240 V~ 50 Hz (SL CN 150 IP65)
110 V~ 50/60 HZ (SL CN 150 IP65 GB)
Output: 50 W (1 x 50 W)
Cable: 5 m H07RN-F3G1,0
Protective cover dimensions: 281.5 x 231 x 4 mm
Tripod: extendable from 0.80 m – max. 1.62 m
The heavy-duty LED light is suitable for indoor and outdoor lighting applications. The chip LED
light with tripod is wired ready for connection and comes with a connecting cable and a safety
plug.
Note: The light is continuously horizontally adjustable within its pivoting range and can be locked
in position using the locking screws.
SafETy NOTES
1. Do not use this light without properly attached gaskets!
2. LED lights are extremely bright! Avoid looking straight into an LED light beam, as doing so
could result in irreversible eye damage.
3. Damaged protective covers must be replaced with an original Brennenstuhl protective cover
before the light can be used again.
4. If the mains supply cable of the light is damaged it must be replaced by a qualified technician
in order to avoid risks.
5. Make sure the tripod is securely placed and stable. Make sure the cable is not crimped or
otherwise damaged.
BA_Chip_LED_Leuchte_Stativ_Aenderung_3_1409.indd 5 08.09.14 17:13