Brennenstuhl High Performance LED Lamp L903 IP55 9x3W 1675lm white Energy efficiency class A - Manual (Page 10)

10
D
Operating Instructions Premium LED spotlight /zone lighting
TROUBLESHOOTING AND USER INSTRUCTIONS
Problem Possible cause Possible solution
Light does not go on from
motion within the sensor
range. 1. No power. Check all connections and
fuses / switches.
2. Lighting close up is too
bright.
Redirect the motion detector
or change the device's
location.
3. Controller set incorrectly. Adjust sensor angle or
controller.
The light goes on for no
apparent reason (false trigger)
1. Heat sources such as air
conditioners, ventilation
openings, heating
equipment outlets, grills,
other outdoor lighting or
moving cars activate the
motion detector.
Adjust the sensor head away
from these sources.
2. Animals / birds or pets. Readjusting the sensor head
can be helpful.
3. Reflections from swimming
pools or reflective surfaces.
Readjust the motion detector.
Notice: Under cold weather conditions, all devices with PIR sensors are more sensitive than
in warm weather
MANUFACTURER
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 ∙ 72074 Tübingen ∙ Germany
H. Brennenstuhl S.A.S.
F-67460 Souffelweyersheim
lectra-t ag
Blegistrasse 13 ∙ CH-6340 Baar
www.brennenstuhl.com
BA_City_LED_Horizontal_A5_130723.indd 10 23.07.13 16:53