AXING SKM 1-03 - Manual (Page 7)

Operation Instructions SKM 1-03/-04/-05/-06 and 2-03/-04
Chapterl 2: Installation and connection
2014-09-17 © AXING AG | Switzerland | Reserving change in design and type - We cannot be held liable for printing errors 7
2.2 Single operation mode
Before installing modules, the power supply must be switched off. Ground the module acc. to
EN 50083-1, EN 60728-11:2010 in order to avoid dangerous overvoltages (attention: risk of fire/death).
Use the grounding screw attached to the device (see Fig. 2).
In stand-alone mode of the SKM 1-01, the power supply is provided by DC input socket (see Fig. 2). A
separate power supply unit SKZ 5-03 is required for it.
When one module is mounted stand-alone, the RF output is connected to cable network.
The SKM 1-07 can only be used as stand-alone module.
Fig. 4: Assembly and connection
of a single module
Abb. 5: operation mode of the
SKM 1-07