Audio Solutions LP1026 - Manual (Page 5)

5
SteP 1
Read and understand all of the enclosed instructions and verify that all parts are present and appear in
good working order before you begin.
SteP 2
Attach the Wall Plate to the wall.
Wood Stud Mounting
The Wall Plate should be mounted, at the top and bottom, to at least one wooden stud. Locate a wooden
stud and mark the center and edge locations. Position one side of the Wall Plate over the marked wooden
studs and mark for drilling. Using the correct size drill bit, pre-drill a 2.5” deep hole in each marked
location. Secure the other side by installing heavy duty wall anchors. Attach the Wall Plate to the wall using
the included square head screws (Figure 2).
NOTE: Do not use the concrete anchors illustrated in Figure 2 for wood stud mounting.
Concrete Wall Mounting
Choose a solid wall area (avoid securing the mount to mortar joints between concrete blocks or bricks).
Using the correct size drill bit, pre-drill a 2.5” hole in each marked location. Insert the concrete anchor into
the holes and then attach the Wall Plate to the wall using the included square head screws (Figure 2).
Figure 2 - Wood Stud/Concrete Mounting
INStAllAtION