Audio Solutions LP1026 - Manual (Page 2)

2
Introduction
Congratulations on the purchase of your new Audio Solutions LP1026 Television Wall Mount. For maximum
benefit, please read the entire manual before beginning installation.
NOTE:
This model has been designed to work with most 10 to 26 inch Plasma, LCD and LED televisions
with a maximum weight of 33lbs (15kg).
Safety Instructions
Please read this entire manual carefully before mounting this bracket to avoid bodily injury and/or any
property loss. If you do not understand these directions, or have any doubts about the safety of the
installation, please call a qualified contractor or contact the Audio Solutions customer service department
@ 1-866-839-9187. Please check carefully to ensure there are no missing or defective parts. Our
customer representatives can quickly assist you with installation questions and missing or defective parts.
Replacement parts for products purchased through authorized dealers will be shipped to you directly. Do
not attempt to use any parts not provided by the manufacturer. Using other screws could cause injury or
property loss. Never use defective parts, as improper installation may cause damage or serious injury. Do
not use this product for any purpose not explicitly specified by Audio Solutions. Audio Solutions cannot be
liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
•
Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Be sure to choose a wall constructed using 2x4 studs or solid concrete, or other reinforcement
strong enough to support the weight of the TV. The location should be safe from hazards such as
water or crushable items. DO NOT ATTEMPT TO MOUNT THIS UNIT TO A HOLLOW WALL!
Hollow Wall or Decorative Cardboard
NO!
Figure 1 - Hollow Wall WARNING!
• WARNING: Use only the supplied screws intended for the current application to avoid personal injury
or property damage.
GettING StARted