Audio Solutions FM3242 - Manual (Page 7)

7
NOTE: You will need at least 2 people to finish this mounting procedure. To avoid possible injury, do not
attempt to mount the TV alone.
NO! YES!
Figure 4 - two Person Install WARNING!
SteP 4
If necessary, use the included allen wrench to loosen the bolts (A) holding the two support bars and slide
the bars to make them symmetrical. Tighten the bolts to secure the bars in place. Hang the pre-assembled
TV unit on the Wall Plate, securing the bracket hooks over each bar (Figure 5). Place the Tube Clips over the
bottom bar and secure to each Bracket using the included M5 x 16 bolts.
A
B
C
Figure 5 - Attach tV Assembly to Wall Plate
INStAllAtION