Atlona AT AV MATRIX - Manual (Page 27)

Atlona Technologies www.atlona.com
27
Command Types Command Codes Functions
System Command
/*Type; Acquires the models information.
/+xxxxxxxx; Rewrites the passwords: must be 8 digits.
/%Lock; Locks the keyboard.
/%Unlock; Unlocks the keyboard.
/:BellOff; Turn off the buzzer.
/:BellOn; Turn on the buzzer.
/^Version; Acquires the version of software
/~CREATOR20; Switch to CREATOR2.0 command system.
[x1]All Transfer signals from input channel [x1] to all output
channels
Operation Command
All# Transfer all input signals to matching output channels.
All$ Switch off all output channels.
[x1]# Transfer signals from input channel [x1] to output
channel [x1].
[x1]$ [x1]$. Switch off output channel [x1].
[x1] V[x2] Transfer the video signals from input channel [x1] to
output channel [x2].
[x1] V[x2],[x3],[x4] Transfer the video signals from input channel [x1] to
output channels [x2], [x3] and [x4].
[x1] A[x2] Transfer the audio signals from input channel [x1] to
output channel [x2].
[x1] A[x2],[x3],[x4] Transfer the audio signals from input channel [x1] to
output channels [x2], [x3] and [x4].
[x1] B[x2] Transfer both video and audio signals from input
channel [x1] to output channel [x2].
[x1] B[x2],[x3],[x4] Transfer both video and audio signals from input
channel [x1] to output channels [x2], [x3] and [x4].
[x1]P[x2] Transfer signals from input channel [x1] to all output
channels in group [x2].
[x1]PP[x2],[x3],[x4] Group output channels [x2], [x3] and [x4] under group
[x1].
S[x] Acquires the output channels in Group[x].
Status[x1] Acquires the input channel to the output channel [x1].
Status Acquires the input channel to the output channels one
by one.
Save[Y] Save the present operation to the preset command [Y].
[Y] ranges from 0 to 9.
Recall[Y] Recall the preset command [Y].
Clear[Y] Clear the preset command [Y].
[X1]*[X2]! Transfer both video and audio signals from input
channel [x1] to output channel [x2].