Definitive Technology IWSUB10/10 - Manual (Page 7)

Hookup Method Two
RCA from Receiver To Subwoofer
Hookup Method One
RCA from Receiver To Subwoofer
Hookup Method Two
1. Use a Low (Line) Level RCA connection from your receiver’s L and R
Line Level Outputs in to the L and R Input of the SubAmp 600. This
connection is “summed” within the SubAmp 600.
2. Use Speaker Wire to connect the top set of Sub Out Jacks on the SubAmp
600 to the terminals on the IWSub 10/10.
3. The SubAmp 600 features an Adjustable Crossover setting on its front
panel. This setting will work with this connection, giving you extra control
over your subwoofer settings.
Hookup Method Three—High Level Speakerwire
Connection
When using the IWSub 10/10 for stereo applications, you can feed it either Low
Level signals as described in Hook Up Methods One and Two, or use Hookup
Method Three described here.
1. Connect Speaker Wire from your receiver’s Left and Right outputs to the
Speaker Level Inputs on the SubAmp 600.
2. Use Speaker Wire to connect the Speaker Level Outputs of the SubAmp
600 to your loudspeakers.
3. Use Speaker Wire to connect the top set of Sub Out Jacks on the SubAmp
600 to the terminals on the IWSub 10/10.
7