Lingenfelter L350xx0000 Lingenfelter Momo Shift Knob v1.4 - Manual (Page 4)

Page 3.
1. Remove the factory shift knob by rotating it
in the counterclockwise direction.
3. Place the black threaded ring onto the shift
lever with the tapered end pointed down.
2. Remove the black threaded ring that is
screwed onto the end of the LPE shift knob.
8mm
10mm
12mm
14mm
15mm
4. Using a set of calipers (or equivalent),
measure the diameter of the gear lever.
Based on the diameter of the gear lever,
install the respective adapter onto the top of
the shift lever if necessary.