beautypg.com

Lingenfelter L350xx0000 Lingenfelter Momo Shift Knob v1.4 User Manual

Page 3

background image

Page 2.

If you are installing the LPE shift knob along with the LPE shift knob boot adapter (PN:

L350191410) on the 2010-2013 Camaro, please refer to the LPE shift knob boot adapter

instructions for installing both components.

There are currently two versions of the LPE Momo shift knob. The latest version of this shift

knob features a 16mm inner diameter, which is .5mm larger than the original version. This

change was made in order to allow installation of this shift knob on some additional vehicles,

such as the 1993-2002 Camaro/Firebird and the 2004-2007 CTS-V. For this reason, it is crucial

for you to check the diameter of your shift lever before you place your order so that we can

provide you with the correct version for your application. If your shift lever measures between

15.5mm (.610”) and 16mm (.630”), you will need the newer version of the LPE shift knob.

Neither version of the LPE shift knob will work with a shift lever larger than 16mm (.630”).

Once you have received your LPE Momo shift knob, make sure to check the part number on

the shift knob box label (shown in the illustration below) against the chart below to verify that

the shift knob that you received will fit on your application.

LPE shift knob

Inner Diameter

Red stitching Black stitching Silver Stitching

Old version

15.5mm (.610”) 1551161LPERE 1551161LPEBK 1551161LPESL

New version

16.0mm (.630”) 155116LPE16R 155116LPE16B 155116LPE16S

Notice: The 1993-2002 Camaro/Firebird and 2004-2007 CTS-V need the newer version of the

LPE Momo shifter knob, LPE part numbers L350140000, L350160000 and L350150000. C5

and C6 Corvettes, 5th Gen Camaros and 4th Gen GTOs can use either version of the shifter

knob. Be sure to double check the shifter lever before ordering to confirm, especially if an

aftermarket shifter is installed.

Read the entire instruction manual before beginning installation. Some stock parts may be

used in reassembly. This installation manual assumes that the stock shift knob has already

been removed.

When referencing the side of the vehicle, the driver side of the vehicle is considered the left

side and the passenger side of the vehicle is considered the right side of the vehicle.