Status, Edid data display – Hall Research VSA-HA-DP User Manual

Page 8

VSA-HA-DP Software Guide

Disable DDC

Enabling this control will turn off the DDC communication with the SOURCE device. The

SOURCE will receive no response from any HDCP or EDID requests. This effectively

disables the SOURCE from displaying HDCP content and most PC's will not output any

video if they can't read the EDID.
FACTORY DEFAULT is not enabled (HDCP and EDID are enabled).

2.7. Status

No Video

Video Input

Indicates the system is not receiving an INPUT video signal.

HDCP On

Indicates video received has HDCP Encryption enabled.

HDCP Off

Indicates video received has HDCP Encryption disabled.

No Audio

Audio Input

Indicates no audio received (DVI mode)

Multi-Channel

Indicates HDMI audio received is not LPCM format.

2 Chn

Indicates HDMI audio received is LPCM format.

Connected or Disconnected

Video Output

Indicates the state of the device connected to the VSA-HA-DP OUTPUT.

2.8. EDID Data Display

The data shown in the EDID table is continuously and updated on the screen. Also the

software ensures that the checksums for each block is valid.