Tool bar menu – Hall Research VSA-HA-DP User Manual

Page 5

HDMI Wall Plate with Audio Extraction

2.3. Tool Bar Menu

Restore device settings from file
Used to select previously saved files

Save device settings to a file
Saves the current configuration file to any location on the PC.

Restore the device to factory default settings.

The user must confirm the action.

Factory Defaults

Import an EDID (256-byte binary or XML file) into the unit.

Import EDID

Save the current EDID as a 256-byte binary file

This file can be edited using third party software and reloaded using

the 'Import EDID' tool selection.

Export EDID

Writes the current 256-byte EDID to the sink device currently

connected to the output . The user must confirm the action.

Write EDID

(use with caution)

This command tries to alter the EDID of whatever is connected to

the HDMI output (of the VSA receiver). Most displays such as LCDs

or projectors may have a Read-Only EDID, in which case this

command will not able to alter the EDID in the display. The user

must confirm the action and take all necessary precautions to

prevent loss of data. Hall Research is not responsible for any

damage that may occur from the user attempting to modify the

EDID of the sink device.

Allows field upgrade of the firmware in the VSA-HA-DP. If your unit

is not upgradable, then this function will be disabled.

Firmware Update

Exits the application

Displays screen with software versions, website link, legal