50 hour, Rt30 operator’s manual – Ditch Witch RT30 User Manual
Page 77
Service - 76
RT30 Operator’s Manual
50 Hour
50 Hour
Clean Oil Cooler/Radiator
Clean oil cooler and radiator with compressed air
or spray wash every 50 hours of operation. Clean
more often if operating in dusty or grassy
conditions. Be careful not to damage fins with
high-pressure air or water.
To clean:
1. Clean fins with compressed air or spray wash.
2. Remove grill and spray through cooling fins
away from engine.
3. If grease and oil are present on cooling fins,
spray with solvent and allow to soak
overnight.
Check Belt Tension
Check belt tension every 50 hours. Belt is
properly tensioned when it moves about 3/8” (10
mm) when pushed. If belt is loose, loosen
alternator bolts (1) and adjust alternator.
Retighten bolts.
Location
Task
Notes
TRACTOR
Clean oil cooler/radiator
Check belt tension
Change hydraulic filter
Initial service
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)