Dynex DX-22LD150A11 - Manual (Page 35)

32
Specifications DX-19LD150A11/DX-22LD150A11
Remote control
General
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV/DVD combo, then turn it on again.
Specifications
Design and specifications are subject to change without notice.
Dimensions and weight are approximate. Picture has a few
bright or dark dots • A few bright or dark dots on an LCD screen
is normal. It does not affect the operation of
this TV/DVD combo.
Good picture, no
sound • Increase the volume.
• Press MUTE to make sure that the sound is
not muted.
• Make sure that the audio mode is set to
Stereo or Mono. For more information, see
“Adjusting the sound” on page 15.
Audio noise or static • Move radio frequency communication
equipment, such as a cordless phone, away
from your TV/DVD combo.
Problem Solution
Remote control
does not work • Replace the batteries. For more
information, see “Installing remote control
batteries” on page 7.
• Make sure that the batteries are inserted
correctly. For more information, see
“Installing remote control batteries” on
page 7.
• Make sure that the power cord is plugged
into an AC power outlet.
Trouble
programming your
existing universal
remote control. • See instructions and a table of common
codes in “Programming a universal remote
control” on page 8.
• Codes are subject to change. For up to date
codes, go to www.dynexproducts.com.
• Replace the batteries. For more
information, see “Installing remote control
batteries” on page 7.
• Refer to the User Guide that accompanied
your universal remote control and contact
the manufacturer if problems persist.
Problem Solution
Cannot tune to
one or more
channels • The program you want to watch may be
blocked through the parental controls. For
more information, see “Setting parental
control levels” on page 20.
• The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. For more
information, see “Changing channel settings”
on page 17.
Cannot access
some items • If a setting or option is grayed out, it is not
available in the current input mode.
Password is lost • On the Parental Controls menu, enter 9999 for
the password, then set a new password. For
more information, see “Setting parental
controls“ on page 19.
TV/DVD combo
cabinet creaks • When you are using your TV/DVD combo, the
temperature inside the cabinet increases. This
causes the cabinet to expand or contract,
which produces the creaking noise. This is not
a malfunction.
Buttons do not
work • Unplug the power cord for a few seconds,
then plug it back in and turn on your TV/DVD
combo.
Problem Solution
Models DX-19LD150A11
DX-22LD150A11
LCD DX-19LD150A11
Panel 19-inch active matrix full
high definition TFT
Resolution 1366 x 768
Color 6 bit with FRC/ 16.7 M
Viewing angle 170° horizontal - 160° vertical
Contrast ratio 1000:1
Brightness (typical) 250 nits
Response time 5.0 ms
DX-22LD150A11
Panel 22-inch active matrix full
high definition TFT
Resolution 1366 x 768
Color 6 bit with FRC/ 16.7 M
Viewing angle 170° horizontal - 160° vertical
Contrast ratio 800:1
Brightness (typical) 400 nits
Response time 5.0 ms
Physical
specifications
DX-19LD150A11 Dimensions (W × D × H)
With stand:
18.5 Ч 7.19 Ч 14.37 in
(470 Ч 182.5 Ч 365 mm)
Without stand:
18.5 Ч 2.87 Ч 12.74 in
(470 Ч 73 Ч 323.5 mm)
Weight
With stand: 9.48 lb (4.3 kg)
Without stand: 8.82 lb
(4.0 kg)
DX-22LD150A11 Dimensions (W × D × H)
With stand:
21.18Ч 7.24 Ч 15.63 in
(538 Ч 184 Ч 397 mm)
Without stand:
21.18 Ч 2.3 Ч 14.53 in
(538 Ч 71 Ч 369 mm)
Weight
With stand: 10.8 lb (4.9 kg)
Without stand: 10.14 lb
(4.6 kg)
TV Standard NTSC and ATSC
Tuning system Electronic tuning system
Frequency range VHF and UHF
CATV 135 channel, QAM channels
Compatibility 480i, 480p, 720p, 1080i
DVD player Disc compatibility 12 cm Digital Audio CD
CD-R
CD-RW
12 cm DVD-Video
DVD-R
DVD-RW
DVD+R
DVD+RW
DVD-R DL Dual Layer
DVD-RW Dual Layer
DVD+R Dual Layer
DVD+RW Dual Layer
DX-19LD-22LD_10-0118.book Page 32 Monday, February 1, 2010 1:44 PM