MUTEC MC-3.2 Smart Clock HD - Manual (Page 20)

\\\\\\\\\\\\
AP P E N D I X AP P E N D I X AP P E N D I X
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
Manual SDs-01 E 3.2.2003 18:26 Uhr Seite 14
20
Technical Data
WORD CLOCK SYNC OUTPUT 1 – 4
Interface
8 x BNC female, unbalanced, individually buffered, adjustable in pairs
Output Levels 3.5 V (p-p) @ 75 Ω, output impedance 22 Ω
AES/EBU SYNC OUTPUT 5
Interface
2 x XLR male, transformer balanced, 3.5 Vpp @ 110 Ω, output impedance 110 Ω,
individually buffered
Format AES 11 – 1997/2003
Resolution 24 bits
S/PDIF SYNC OUTPUT 6
Interfaces
1 x Coaxial (Cinch/RCA female), unbalanced, 0.5 V (p-p) @ 75Ω, output impedance 75Ω,
individually buffered
1 x Toshiba Toslink TM , EIAJ RC-5720
Format IEC 60958 blank frame
Resolution 24 bits
VIDEO SYNC OUTPUTS
SD bi-level Video Interface
2 x BNC female, unbalanced, output impedance 75Ω, individually buffered
300 mVpp ± 7 mV burst level @ 75 Ω, 300 mVpp ± 7 mV H/V sync level @ 75 Ω
HD tri-level Video Interface
2 x BNC female, unbalanced, output impedance 75Ω, individually buffered
+/- 300 mVpp ± 7 mV sync high/low @ 75 Ω
VIDEO GENERATOR SPECIFICATIONS
Generated SD bi-level
Video Sync Standards
PAL 24 fps, 625 lines, ITU-R.BT470
PAL 23.98 fps, 625 lines, ITU-R.BT470, so-called ‘Slow-PAL’
PAL 25 fps, 625 lines, ITU-R.BT470
NTSC 29,97 fps, 525 lines, SMPTE170M
NTSC 30 fps, 525 lines, SMPTE170M
Generated SD bi-level
Video Sync Formats
Black + Burst, Composite video sync 100/75 EBU PAL + 100/7.5//75/7.5 NTSC Color bar
Generated HD tri-level
Video Sync Standards
720p/23.98fps, 720p/24fps, 720p/25fps, 720p/29.97fps, 720p/30fps, 720p/50fps, 720p/59.94fps,
720p/60fps
1080PsF/23.98fps, 1080PsF/24fps, 1080i/50fps, 1080i/59.94fps, 1080i/60fps
1080p/23.98fps, 1080p/24fps, 1080p/25fps, 1080p/29.97fps, 1080p/30fps
INTERNAL REFERENCE CLOCK SPECIFICATIONS
Oscillator type
TCXO, temperature compensated crystal oscillator
Clock accuracy (shipped) < ± 0.5ppm
Clock stability vs. temperature < ± 0.5ppm within -10°C to + 60°C
Operating temperature -10°C to + 60°C
Clock jitter < 10ps (RMS)
POWER SUPPLY
Type
Internal switching power supply
Input voltage 90 V – 260 V (automatic adjustment), 47 Hz – 440 Hz
Power consumption max. 10 W
SYSTEM UNIT COVER
Cover size / material / color
196 x 42 x 156mm without connectors (W x H x D), aluminium sheet 1mm, black
Front panel size / material 198 x 44 x 2mm (W x H x D), aluminium
Weight ~ 1356g