MUTEC MC-1.1+ - Manual (Page 8)

\\\\\\\\\\\\
I N T R O D U C T I O N I N T R O D U C T I O N I N T R O D U C T I O N
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
Manual SDs-01 E 3.2.2003 18:26 Uhr Seite 5
8
Peripheral MUTEC Products
Format and Sampling Rate Converters with internal Master Clock:
MC-4
The MC-4 is a high-performance digital audio multichannel format and
sampling rate converter for ADAT
TM , AES3 and S/P-DIF
MC-6
The MC-6 is a high-performance digital audio dual channel format con-
verter for AES3, AES3id and S/P-DIF.
MC-8 + MC-8.1
The MC-8 and MC-8.1 are 8 channel, high-performance digital audio and
sampling rate converters for AES3 and AES3id.
Digital Signal Distribution Amplifier:
MC-2
The MC-2 is a high-performance digital audio and reference sync signal
distribution amplifier for AES3/11 and AES3/11id signals. The unit distrib-
ute s and converts between the mentioned AES signals and standards.
Accessories for the MUTEC MC Product Series:
Optical cables in different lenghts from 0.5 m to 20 m for S/P-DIF and
ADAT
TM transfers.
MW-02/19
Mounting plate to install two MC products side by side into one unit of
a 19” rack.
MW-03/19
Set of two rack mounting angles to install one MC product on the rear
side of a 19” rack.
MW-05/19
Set of two rack mounting angles to install one MC product frontally into
one unit of a 19” rack.
For all peripheral products please have a look on our website:
www.MUTEC-net.com